Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites

In this work, an easy, low-cost, and widely applicable method was developed to improve the compatibility between the ceramic fillers and the polymer matrix by adding 3-aminopropyltriethoxysilane (KH550) as a coupling agent during the fabrication process of BaTiO3-P(VDF-CTFE) nanocomposites through solution casting. Results show that the use of KH550 can modify the surface of ceramic nanofillers; therefore, good wettability on the ceramic-polymer interface was achieved, and the enhanced energy storage performances were obtained by a suitable amount of the coupling agent. This method can be used to prepare flexible composites, which is highly desirable for the production of high-performance film capacitors. If an excessive amount of coupling agent is used in the process, the non-attached coupling agent can participate in complex reactions, which leads to a decrease in dielectric constant and an increase in dielectric loss.