Prediction of manufacturing parameters of additively manufactured 316L steel samples using ultrasound fingerprinting

Metal based additive manufacturing techniques such as laser powder bed fusion can produce parts with complex designs as compared to traditional manufacturing. The quality is affected by defects such as porosity or lack of fusion that can be reduced by online control of manufacturing parameters. The conventional way of testing is time consuming and does not allow the process parameters to be linked to the mechanical properties. In this paper, ultrasound data along with supervised learning is used to estimate the manufacturing parameters of 316L steel samples. The steel samples are manufactured with varying process parameters (speed, hatch distance and power) in two batches that are placed at different locations on the build plate. These samples are examined with ultrasound using a focused transducer. The ultrasound scans are performed in a dense grid in the build and transverse direction, respectively. Part of the ultrasound data are used to train a partial least squares regression algorithm by labelling the data with the corresponding manufacturing parameters (speed, hatch distance and power, and build plate location). The remaining data are used for testing of the resulting model. To assess the uncertainty of the method, a Monte-Carlo simulation approach is adopted, providing a confidence interval for the predicted manufacturing parameters. The analysis is performed in both the build and transverse direction. Since the material is anisotropic, results show that there are differences, but that the manufacturing parameters has an effect of the material microstructure in both directions.