石墨烯
氧化物
材料科学
臭氧
氧化石墨烯纸
纳米技术
化学
复合材料
有机化学
冶金
作者
Zhen Zhu,Ming-Hung Chung,Shuyan Xu,Ren‐Jang Wu
标识
DOI:10.1016/j.snb.2023.135039
摘要
In this research, cuprous oxide (pristine Cu2O) and rGO (reduced graphene oxide)-doped Cu2O were prepared using a simple synthetic route and adopted as sensitive materials for ozone detection. The microstructural, morphological and compositional properties of as-prepared samples have been analyzed by several characterization techniques including X-ray diffraction (XRD), High resolution transmission electron microscopy (HRTEM), Energy dispersive spectrometer (EDS), UV-Visible spectrophotometer (UV–vis), Multi-functional field emission scanning electron microscope (FESEM), X-ray Photoelectron Spectroscopy (XPS) and Brunauer-Emmett-Teller (BET). Meanwhile, the sensing features of as-prepared samples have been investigated carefully and the as-prepared 0.5 wt% rGO-Cu2O exhibited best ozone sensing properties, such as high stability, sensitivity and selectivity. It can be found that the response value of 0.5 wt% rGO-Cu2O-based sensor towards 20 ppb ozone and 1 ppm ozone were 9.2/1734, respectively, and the corresponding response and recovery times were 11/64 s and 11/411 s, respectively. More importantly, the detection limit of the 0.5 wt% rGO-Cu2O sensor was as low as 0.1 ppb. Furthermore, the possible mechanism for the enhanced sensing performance of the as-prepared rGO-Cu2O has been discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI