表征(材料科学)
材料科学
电介质
复合材料
光电子学
纳米技术
作者
Junyoung Choi,Suin Jang,Dongmyeong Lee,Hoogwan Lee,Sarah Eunkyung Kim
出处
期刊:International Microsystems, Packaging, Assembly and Circuits Technology Conference
[Institute of Electrical and Electronics Engineers]
日期:2024-10-22
卷期号:: 354-357
被引量:1
标识
DOI:10.1109/impact63555.2024.10818910
摘要
SiCN has gained attention as a dielectric material in hybrid bonding due to its excellent surface roughness after chemical mechanical polishing, copper diffusion barrier properties, and high bonding strength. Typically, SiCN deposition is carried out using plasma-enhanced chemical vapor deposition (PECVD), which involves high deposition and annealing temperatures exceeding 350°C. In this study, we investigate the potential of SiCN as a dielectric material for hybrid bonding by depositing it using physical vapor deposition (PVD). The PVD SiCN process is less complicated than the PECVD SiCN process and the deposition temperature is also lower. To evaluate PVD SiCN films, the effects of RF power and the Ar/N2ratio on the films were investigated. The deposition rate ranged from a minimum of 124.5 Å/min to a maximum of 428.3 Å/min, depending on the process conditions. The oxygen content in the SiCN thin films varied between 11% and 65% based on the deposition conditions, and the refractive index ranged from 1.5 to 1.9.
科研通智能强力驱动
Strongly Powered by AbleSci AI