转换器
还原(数学)
总谐波失真
计算机科学
电子工程
控制理论(社会学)
电容器
谐波分析
减刑
功率(物理)
谐波
材料科学
瞬态分析
电气工程
电感器
谐波
电力电子
换向电池
拓扑(电路)
功率损耗
晶闸管
作者
Zhaowen Zhong,Bin Duan,Wenlong Ding,Chenghui Zhang,Yujiao Zhao,Xianzhe Pang
标识
DOI:10.1109/jestpe.2026.3710141
摘要
Single-phase five-level active neutral point clamped (5L-ANPC) converters have gained extensive attention in recent years owing to the combined advantages of conventional neutral point clamped (NPC) converters and flying capacitor (FC) converters. However, traditional modulation methods, which reduce switching loss by clamping the switching state, exhibit a significantly higher output current total harmonic distortion (THD) brought by using fewer vectors to synthesize the reference voltage. To overcome this drawback, a novel two-stage optimization method is proposed in this article. First, a detailed analysis is conducted on the basic operating principle and switching vectors of 5L-ANPC converters, along with their impact on the capacitor voltages. Then, a three-segment sequence, formed with two adjacent voltage vectors, is determined to decrease the switching transitions in each switching period. Subsequently, a current deviation matrix, composed of the predicted current tracking deviation of each switching segment, is introduced to optimize the switching region and the duty ratios of the selected voltage vectors. Furthermore, based on the analysis of deadtime effect on voltage vector synthesis and capacitor voltage deviations, the switching sequence is optimized, thereby contributing to the switching commutation reduction and capacitor voltage control. Consequently, the output current THD mitigation, switching loss reduction, and capacitor voltage control are realized simultaneously. Experimental results validate the effectiveness and advantages of the proposed method.
科研通智能强力驱动
Strongly Powered by AbleSci AI