清晨好,您是今天最早来到科研通的研友!由于当前在线用户较少,发布求助请尽量完整地填写文献信息,科研通机器人24小时在线,伴您科研之路漫漫前行!

Development of metal matrix composites through solid-state additive friction deposition

作者
Mohammad Faseeulla Khan,Ramachandran Damodaram,Md Saad Patel,G.D. Janaki Ram,G. M. Karthik
出处
期刊:Journal of materials research and technology [Elsevier BV]
卷期号:42: 4502-4513 被引量:4
标识
DOI:10.1016/j.jmrt.2026.04.100
摘要

Metal matrix composites (MMCs), particularly AA2014-based systems, are attractive for aerospace and automotive applications owing to their high strength-to-weight ratio. Incorporating SiC as a reinforcement significantly enhances their wear resistance; however, conventional fusion-based additive manufacturing (AM) processes often encounter challenges such as dilution, reinforcement segregation, porosity, deleterious interfacial reactions, and solidification-induced cracking. Therefore, in this work, a novel solid-state AM approach based on additive friction deposition (AFD) is demonstrated for the fabrication of MMCs, thereby overcoming these limitations. AFD experiments were conducted using AA2014-T6 consumable rods (20 mm diameter), containing multiple pre-drilled holes (2 mm diameter) filled with silicon carbide powder (SiC P , D 50 ∼25 ± 5 μm). Single and multi-layer AA2014/SiC P composite deposits were successfully fabricated on AA2014-T6 substrate. Microstructural analysis revealed fine, dynamically recrystallized equiaxed grains (∼ 2-3 μm) with a uniform dispersion of SiC particles (12 ± 2 vol.%), and no evidence of any deleterious interfacial reaction products. The AA2014/SiC P deposits showed ∼85% higher microhardness (240 ± 5 HV) and ∼36 % lower wear loss compared to monolithic AA2014-T6 (130 ± 5 HV). Notably, the hardness of the AFD composites exceeded that of similar materials produced by conventional processing methods. Shear testing confirmed strong metallurgical bonding between the deposit and the substrate, with the composite achieving a shear strength of 140 ± 5 MPa, close to that of the AA2014-T6 substrate (160 ± 5 MPa). Overall, these results demonstrate that AFD is a promising solid-state approach for fabricating AA2014/SiC P composites with enhanced mechanical and tribological properties suitable for fabrication of AM-MMC components, surface engineering and repair applications.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
stooyan完成签到,获得积分10
刚刚
mayberichard完成签到,获得积分10
1秒前
5秒前
迷路的穆完成签到,获得积分10
6秒前
9秒前
TingtingGZ发布了新的文献求助10
13秒前
紫熊发布了新的文献求助10
19秒前
虚幻的雁山完成签到,获得积分10
38秒前
沉默的樱完成签到,获得积分10
46秒前
紫熊发布了新的文献求助10
52秒前
54秒前
58秒前
整齐念薇完成签到,获得积分10
1分钟前
1分钟前
英姑的应助被傻傻的芷巧采纳,获得10
1分钟前
1分钟前
超级冷梅完成签到,获得积分10
1分钟前
chen发布了新的文献求助10
1分钟前
CMC智能助手完成签到,获得积分10
1分钟前
无私鹤轩完成签到,获得积分10
1分钟前
凶狠的草莓完成签到,获得积分10
1分钟前
1分钟前
故意的听安完成签到,获得积分10
1分钟前
1分钟前
紫熊发布了新的文献求助10
1分钟前
6666发布了新的文献求助10
2分钟前
2分钟前
超级诗桃完成签到,获得积分10
2分钟前
chen完成签到,获得积分10
2分钟前
2分钟前
姜OMG发布了新的文献求助10
2分钟前
如歌完成签到,获得积分10
2分钟前
科研通AI2S的应助被6666采纳,获得10
2分钟前
紫熊发布了新的文献求助10
2分钟前
自然如曼完成签到 ,获得积分10
2分钟前
2分钟前
小巧惜蕊完成签到,获得积分10
2分钟前
故意的绿真完成签到,获得积分10
2分钟前
拼搏的小凝完成签到,获得积分10
2分钟前
3分钟前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
John McDowells Bildungstheorie 800
八旗制度の研究 600
plantTFDB 508
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8173194
求助须知:如何正确求助?哪些是违规求助? 9565558
关于积分的说明 21780496
捐赠科研通 7767299
什么是DOI,文献DOI怎么找? 3431542
关于科研通互助平台的介绍 2555697
邀请新用户注册赠送积分活动 2476688