电极
材料科学
墨水池
印刷电路板
可穿戴技术
数码产品
3d打印
导电体
复合数
柔性电子器件
可穿戴计算机
液态金属
印刷电子产品
信号(编程语言)
电子线路
光电子学
聚乙烯
环氧树脂
生物医学工程
电子工程
3D打印
快速成型
声学
信号处理
电导率
导电的
脑电图
电极阵列
导电油墨
计算机科学
聚酰亚胺
作者
Shuting Liang,Fengjiao Li,Junhen Fu,Dabo Jiang,Liang Hu,Yuanzhe Tang,Jing Wang,Hongwei Liu,Xuan Lin Liu
标识
DOI:10.1002/admt.202502205
摘要
ABSTRACT Smart wearable electronics are gaining increasing attention for use in human–machine interfaces, health monitoring, and motion tracking. However, fabricating conventional flexible electronics typically involves complex processes. Here, we demonstrate that 3D printing can be employed to fabricate high‐precision, highly sensitive flexible electrodes. We developed three types of liquid metal‐based composite inks. Using 3D printing, we deposited liquid metal hybrid inks onto flexible, high‐viscosity double‐sided polyethylene or PET substrates, producing skin‐adhesive sensors for physiological monitoring. With LM composite inks, we fabricated customized electrocardiogram (ECG) and electroencephalogram (EEG) electrodes using software. These were printed on 300 µm thick polyethylene substrates at a print speed of 4% and a nozzle‐to‐substrate distance of 500 µm. The resulting three‐layer ECG/EEG electrodes are flexible, skin‐adhesive, and have a total thickness of 910 µm, with sizes of 8.2 × 5.9 cm and 5.0 × 4.6 cm, respectively. After encapsulation with epoxy resin, the electrodes achieved a conductivity of 1.63 × 10 6 S·m −1 . They show potential for early disease detection by accurately distinguishing between EEG signals in states such as excitement and sleep. The printed circuits are precise, visually well‐defined, and suitable for reliable heart rate and physical activity monitoring directly on the skin.
科研通智能强力驱动
Strongly Powered by AbleSci AI