材料科学
摩擦电效应
复合材料
生物炭
电介质
复合数
抗弯强度
渗流阈值
弯曲模量
电容器
气凝胶
纳米发生器
高-κ电介质
多孔性
导电体
杨氏模量
介电损耗
微观力学
纳米复合材料
模数
电流密度
作者
Yijun Hu,Hao Wang,Chenyan Hua,Juan Zhou,Yujian Chen,Yujian Chen,Chaofan He,Tingting Zhang,Yuxia Chen,Yuxia Chen,Yong Guo
摘要
ABSTRACT Developing sustainable polymer composites with enhanced mechanical robustness and electrical performance is essential for next‐generation biodegradable electronic devices. In this work, biodegradable poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) composites were fabricated by integrating particulate biochar derived from Quercus acutissima wood (MLB) with a hierarchical luffa‐derived biochar (LB) network. The layered LB framework reinforced the composite while increasing the density of conductive–insulating heterogeneous interfaces, thereby promoting Maxwell–Wagner–Sillars (MWS) interfacial polarization. The optimized composite containing four LB layers (4LB) exhibited a flexural strength of 19.86 MPa, a flexural modulus of 447.20 MPa, an open‐circuit voltage of 100.76 V, and a short‐circuit current of 6.83 µA, achieving the best overall mechanical and triboelectric performance. Although the dielectric constant increased continuously with increasing LB content, excessive LB incorporation (6LB) promoted localized electrical conduction and dielectric loss as the composite approached the percolation threshold, resulting in charge leakage and reduced triboelectric output. COMSOL simulations further confirmed that the hierarchical LB architecture homogenized the internal electric‐field distribution and enhanced electrostatic induction. These findings demonstrate that synergistic regulation of hierarchical architecture and conductive carbon content provides a promising strategy for simultaneously optimizing the mechanical, dielectric, and triboelectric properties of biodegradable polymer composites for sustainable self‐powered electronic applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI