原子层沉积
材料科学
图层(电子)
有机太阳能电池
能量转换效率
纳米技术
薄膜
光伏
光电子学
表面改性
沉积(地质)
化学工程
光伏系统
复合材料
聚合物
生态学
古生物学
沉积物
生物
工程类
作者
Kwang-Dae Kim,Dong Chan Lim,Jinhee Hu,Jung‐Dae Kwon,Myung‐Geun Jeong,Hyun Ook Seo,Joo Yul Lee,Ka-Young Jang,Jae‐Hong Lim,Kyu Hwan Lee,Yongsoo Jeong,Young Dok Kim,Shinuk Cho
摘要
A ripple-structured ZnO film as the electron-collecting layer (ECL) of an inverted organic photovoltaic (OPV) was modified by atomic layer deposition (ALD) to add a ZnO thin layer. Depositing a thin ZnO layer by ALD on wet-chemically prepared ZnO significantly increased the short-circuit current (Jsc) of the OPV. The highest power conversion efficiency (PCE) of 7.96% with Jsc of 17.9 mA/cm2 was observed in the inverted OPV with a 2-nm-thick ALD-ZnO layer, which quenched electron-hole recombination at surface defects of ZnO ripples. Moreover, an ALD-ZnO layer thinner than 2 nm made the distribution of electrical conductivity on the ZnO surface more uniform, enhancing OPV performance. In contrast, a thicker ALD-ZnO layer (5 nm) made the two-dimensional distribution of electrical conductivity on the ZnO surface more heterogeneous, reducing the PCE. In addition, depositing an ALD-ZnO thin layer enhanced OPV stability and initial performance. We suggest that the ALD-ZnO layer thickness should be precisely controlled to fabricate high-performing OPVs.
科研通智能强力驱动
Strongly Powered by AbleSci AI