碘酸盐
阴极
电解质
氧化还原
电池(电)
水溶液
化学
无机化学
制作
化学工程
碘化物
电极
有机化学
医学
功率(物理)
物理
替代医学
物理化学
量子力学
病理
工程类
作者
Zhiqian Wang,Giuseppe L. Di Benedetto,James L. Zunino,Somenath Mitra
标识
DOI:10.1016/j.matchemphys.2021.125070
摘要
We present the synthesis of lead iodate (Pb(IO3)2) using precipitation reactions for the fabrication of cathodes. Pb(IO3)2-Zn reserve batteries are fabricated in 3D-printed battery casings. Pb(IO3)2-nano carbon composites show higher stability and more consistent performance than the mixtures of these compounds. The reaction products and cell performances are dependent on electrolytes and discharge rates. These primary batteries exhibit an output voltage around 1.6 V when acid-salt water dual electrolytes are used. At low discharge rates, the iodate gets reduced to I2, yet under high-rate discharge, PbI2 is produced. The cathode material Pb(IO3)2 hence demonstrates specific capacities between 416 and 550 mAh g−1. Only the IO3− takes part in the redox reactions and provides the capacity. Hence, Pb could be replaced with other metals, and the chemistry here could be applied to other insoluble iodate salts for environmental concerns and lower costs.
科研通智能强力驱动
Strongly Powered by AbleSci AI