材料科学
碳纳米管
薄膜晶体管
晶体管
碳纳米管场效应晶体管
氧化物
光电子学
纳米技术
半导体
金属
场效应晶体管
图层(电子)
电气工程
电压
冶金
工程类
作者
Qiqi Xu,Jianwen Zhao,Vincenzo Pecunia,Wenya Xu,Chunshan Zhou,Junyan Dou,Weibing Gu,Jian Lin,Lixin Mo,Yanfei Zhao,Zheng Cui
标识
DOI:10.1021/acsami.7b01666
摘要
The fabrication of printed high-performance and environmentally stable n-type single-walled carbon nanotube (SWCNT) transistors and their integration into complementary (i.e., complementary metal-oxide-semiconductor, CMOS) circuits are widely recognized as key to achieving the full potential of carbon nanotube electronics. Here, we report a simple, efficient, and robust method to convert the polarity of SWCNT thin-film transistors (TFTs) using cheap and readily available ethanolamine as an electron doping agent. Printed p-type bottom-gate SWCNT TFTs can be selectively converted into n-type by deposition of ethanolamine inks on the transistor active region via aerosol jet printing. Resulted n-type TFTs show excellent electrical properties with an on/off ratio of 106, effective mobility up to 30 cm2 V-1 s-1, small hysteresis, and small subthreshold swing (90-140 mV dec-1), which are superior compared to the original p-type SWCNT devices. The n-type SWCNT TFTs also show good stability in air, and any deterioration of performance due to shelf storage can be fully recovered by a short low-temperature annealing. The easy polarity conversion process allows construction of CMOS circuitry. As an example, CMOS inverters were fabricated using printed p-type and n-type TFTs and exhibited a large noise margin (50 and 103% of 1/2 Vdd = 1 V) and a voltage gain as high as 30 (at Vdd = 1 V). Additionally, the CMOS inverters show full rail-to-rail output voltage swing and low power dissipation (0.1 μW at Vdd = 1 V). The new method paves the way to construct fully functional complex CMOS circuitry by printed TFTs.
科研通智能强力驱动
Strongly Powered by AbleSci AI