膜
生物污染
涂层
化学工程
材料科学
纤维素
超滤(肾)
结垢
化学
复合材料
色谱法
生物化学
工程类
作者
Langming Bai,Yatao Liu,An Ding,Nanqi Ren,Guibai Li,Heng Liang
出处
期刊:Chemosphere
[Elsevier BV]
日期:2018-11-02
卷期号:217: 76-84
被引量:115
标识
DOI:10.1016/j.chemosphere.2018.10.219
摘要
The inherent properties of hydrophilicity and environmental preferability of cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) make them great candidates for application in water-treatment membranes. In this study, the antifouling properties of CNCs and CNFs, modified ultrafiltration (UF) membranes, were directly compared. A facile modification method was conducted by coating CNCs and CNFs on the surface of polyethersulfone (PES) membranes to prepare CNC-coating membranes and the CNF-coating membranes. Membrane surface morphology was characterized by atomic force microscopy (AFM), and the results showed that the CNF-coating membranes exhibited greater surface roughness than the CNC-coating membranes. Pure water flux measurements demonstrated that the flux of the CNC-coating membranes was slightly lower than that of the CNF-coating membranes. Antifouling properties were evaluated and compared for the two types of membranes by filtration of NOM foulant models, humic acid (HA) and bovine serum albumin (BSA). The results showed that the antifouling properties of the modified membranes were enhanced through the coating of either CNCs or CNFs to a control PES membrane. The CNC-coating membranes outperformed the CNF-coating membranes in alleviating both reversible fouling and irreversible fouling caused by HA and BSA. In addition, the antifouling performance of the coating membranes was enhanced with increased coating content.
科研通智能强力驱动
Strongly Powered by AbleSci AI