Experiment of Mechanical Properties of a Customized Distractor Based on Three-Dimensional Printing Technology

This study aimed to design and fabricate a customized distractor based on 3D printing technology and compare its mechanical properties with conventional distractor. The investigators designed and implemented a study composed of conventional and customized distractors. The design of customized distractor was based on the specification of conventional mandibular distractors and was fabricated using selective laser melting (SLM) technology. The same type of conventional distractors served as control group. Vickers-hardness test, three-point bending test and welding strength test were carried out for the conventional and customized distractor respectively and data was analyzed with t test using SPSS13.0 software package. The sample was composed of 18 distractors grouped as follows: customized distractor (n = 9) and conventional distractor (n = 9). The customized distractor showed better result than the conventional distractor in mechanical property tests, with statistically significant differences in Vickers-hardness and maximum load (P < 0.05), and no significant differences in yield strength and welding strength (P > 0.05). The results of this study suggest indicated that compared to the conventional distractor, the customized distractor had better mechanical properties and could be used in maxillofacial distraction osteogenesis.