传质
喷嘴
湍流
机械
喷油器
入口
材料科学
过程(计算)
传热
机械工程
对流
有限元法
模拟
计算机科学
工程类
结构工程
物理
操作系统
作者
John Wilmer Parra Llanos,Rossane Mailde Santos,Marintho Bastos Quadri,Ianto O. Martins
标识
DOI:10.1177/0040517520918231
摘要
Mathematical modeling and simulation of cotton fabric drying in a stenter machine was performed using a finite element method. A standard κ-ɛ turbulence model was coupled with heat/mass transfer in porous media models. A novel approach to simulate all injectors enabled a new perspective of the process and the calculation of local convective coefficients. Three simulations were run: Simulation I reproduced real operational conditions; Simulations II and III estimated the effects of increasing drying air inlet velocity and decreasing translational velocity of the fabric, respectively. The highest drying air velocities occurred at the nozzles on the edges of the injectors, leading to high convective heat and mass transfer coefficients. Results indicated the drying process was not uniform along the fabric’s width. The models were acceptable in realistically predicting the drying of a cotton fabric in a stenter machine and could be useful in optimizing the stenter design considering the final product’s quality and energy consumption.
科研通智能强力驱动
Strongly Powered by AbleSci AI