材料科学
喷丸
激光喷丸
残余应力
喷丸
微观结构
钛合金
复合材料
表面粗糙度
休克(循环)
表面完整性
冶金
激光扫描
钛
激光器
表层
表面光洁度
硬度
图层(电子)
合金
表面工程
压力(语言学)
抗压强度
压痕硬度
疲劳极限
进程窗口
轮廓仪
表面改性
作者
Wenchen Liao,Yi Li,Haolan Zhang,Qingchuan Guo,Liang Lü,Nian Zhang,Yuqiang Hou,Yao Ou,Bingjie Yang,Yonghao Du,Le Sun,Qiuyu Li,Chao Xu
出处
期刊:
[SPIE]
日期:2025-11-19
卷期号:: 4-4
摘要
TB6 titanium alloy (Ti-10V-2Fe-3Al) is widely used in key aerospace components due to its high strength, lightweight property and excellent fatigue performance. However, traditional shot peening strengthening technology has problems such as shallow residual compressive stress layer and high surface roughness. Laser Shock Peening (LSP) can implant a deep and stable residual compressive stress layer on the material surface through high-energy short-pulse laser-induced plasma shock waves, while maintaining low surface roughness, thereby significantly improving the fatigue life and wear resistance of the material. In this study, TB6 titanium alloy was taken as the research object. The effects of laser energy and scanning line spacing on the microstructure and mechanical properties of the material were systematically investigated. The results show that when the laser energy reaches 210μJ, the scanning line spacing is 20μm, and the scanning speed is 2000mm/s, the surface mechanical properties of the material are improved compared with the untreated substrate. The surface hardness is increased by 13%, the residual compressive stress reaches -155.5MPa, and the material has good surface integrity with a roughness Ra (arithmetic mean roughness) within 0.2μm. This study provides a reliable laser process window for the high-performance surface strengthening of TB6 titanium alloy, and has important engineering value for the long-life design of high-load components in the aerospace field.
科研通智能强力驱动
Strongly Powered by AbleSci AI