锌黄锡矿
拉曼光谱
材料科学
薄膜太阳能电池
化学计量学
捷克先令
锌
开路电压
能量转换效率
薄膜
分析化学(期刊)
星团(航天器)
过渡金属
纳米技术
电压
化学
光电子学
冶金
物理化学
催化作用
光学
物理
色谱法
程序设计语言
量子力学
计算机科学
生物化学
作者
Kuldeep Singh Gour,Vijay Chandrakant Karade,Rahul Parmar,Jun Sung Jang,Shafaq Kazim,Suyoung Jang,R. Gunnella,Jongsung Park,Jae Ho Yun,Jin Hyeok Kim
出处
期刊:Solar RRL
[Wiley]
日期:2023-04-18
卷期号:7 (12)
被引量:7
标识
DOI:10.1002/solr.202200946
摘要
The temperature‐dependent (25–300 °C) disorder transitions analyzed via Raman spectroscopic technique for the different non‐stoichiometric Cu2ZnSn(S,Se)4 (CZTSSe) thin films are demonstrated. In the thin films prepared with different Zn conditions, i.e., in Zn‐1 (Zn‐poor), the density of the A‐type defect cluster [ZnCu + VCu] increases with temperature; however, it slightly decreases and remains constant for Zn‐rich samples, i.e., Zn‐2 and Zn‐3. At the same time, the density of the B‐type defect cluster [2ZnCu + ZnSn] increases with increasing temperature and Zn content. The observations further reveal that Zn concentration has less impact on VCu formation; therefore, above the optimum Cu‐poor and Zn‐rich conditions, ZnCu shallow donors negatively influence the kesterite device performances. Finally, solar cells based on all the CZTSSe thin‐film samples (Zn‐1, Zn‐2, and Zn‐3) are fabricated in which a device based on Zn‐2 exhibits excellent power conversion efficiency of ≈11.0% with open‐circuit voltage of 478 mV, short‐circuit current of 35.51 mA cm−2, and fill factor of 64%, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI