电解质
阳极
阴极
离子电导率
材料科学
离子键合
扩散
快离子导体
卤化物
化学工程
无机化学
活化能
电导率
离子液体
氯化物
载流子
化学物理
离子
锂(药物)
电极
化学
对偶(语法数字)
比能量
电化学
电子迁移率
离子运输机
作者
Zhe Zhao,Lida Ren,Ze Shi,Yundi Miao,Yaobang Wang,Qingshan Lu
摘要
Halide solid electrolytes are attractive candidates for all-solid-state batteries owing to their favorable ionic conductivity, high oxidation stability, and superior mechanical deformability. However, limited Li+ concentration and intrinsically one-dimensional diffusion pathways impede their performance. Herein, dual anion–cation co-doping strategy is involved in UCl3-type electrolytes, yielding a series of nitride-chloride compounds of Li0.5 + 2zZrxLayCl3−zNz. The ionic conductivities are systematically studied through modulating elementary composition and ball-milling time, revealing the correlation among defect chemistry, processing conditions, and Li+ transport behavior. Zr4+ substitution generates cation vacancies that enable one-dimensional channels into three-dimensional networks for Li+ migration, while partial N3− substitution increases the Li+ carrier concentration. Consequently, the optimized Li0.6Zr0.357La0.357Cl2.95N0.05 electrolyte achieves an ionic conductivity of 0.66 mS cm−1 at 25 °C and a low activation energy of 0.285 eV, achieving an enhancement of three orders of magnitude compared with pristine Li0.5La0.833Cl3. This electrolyte remains electrochemically stable up to approximately 4.00 V vs Li+/Li. All-solid-state batteries employing the LiCoO2 as cathode and Li-In as anode deliver an initial discharge capacity of 129.3 mAh g−1 at 0.1 C and retain 77.4% capacity over 100 cycles at 0.33 C. This study highlights coordinated defect engineering and processing optimization for overcoming intrinsic transport limitations in halide solid electrolytes, thereby supporting the development toward high-performance all-solid-state batteries.
科研通智能强力驱动
Strongly Powered by AbleSci AI