下降(电信)
跌落冲击
材料科学
渗透(战争)
表面光洁度
复合材料
润湿
表面粗糙度
霜冻(温度)
接触角
纳米技术
气泡
机械
工程类
物理
电信
运筹学
计算机科学
作者
Tanmoy Maitra,Manish K. Tiwari,Carlo Antonini,Philippe Schoch,Stefan Jung,Patric Eberle,Dimos Poulikakos
出处
期刊:Nano Letters
[American Chemical Society]
日期:2013-12-09
卷期号:14 (1): 172-182
被引量:309
摘要
The superhydrophobic behavior of nano- and microtextured surfaces leading to rebound of impacting droplets is of great relevance to nature and technology. It is not clear however, if and under what conditions this behavior is maintained when such surfaces are severely undercooled possibly leading to the formation of frost and icing. Here we elucidate key aspects of this phenomenon and show that the outcome of rebound or impalement on a textured surface is affected by air compression underneath the impacting drop and the time scale allowing this air to escape. Remarkably, drop impalement occurred at identical impact velocities, both at room and at very low temperatures (−30 °C) and featured a ringlike liquid meniscus penetration into the surface texture with an entrapped air bubble in the middle. At low temperatures, the drop contact time and receding dynamics of hierarchical surfaces were profoundly influenced by both an increase in the liquid viscosity due to cooling and a partial meniscus penetration into the texture. For hierarchical surfaces with the same solid fraction in their roughness, minimizing the gap between the asperities (both at micro- and nanoscales) yielded the largest resistance to millimetric drop impalement. The best performing surface impressively showed rebound at −30 °C for drop impact velocity of 2.6 m/s.
科研通智能强力驱动
Strongly Powered by AbleSci AI