Extension of the angular spectrum method to calculate pressure from a spherically curved acoustic source

The angular spectrum method is an accurate and computationally efficient method for modeling acoustic wave propagation. The use of the typical 2D fast Fourier transform algorithm makes this a fast technique but it requires that the source pressure (or velocity) be specified on a plane. Here the angular spectrum method is extended to calculate pressure from a spherical transducer-as used extensively in applications such as magnetic resonance-guided focused ultrasound surgery-to a plane. The approach, called the Ring-Bessel technique, decomposes the curved source into circular rings of increasing radii, each ring a different distance from the intermediate plane, and calculates the angular spectrum of each ring using a Fourier series. Each angular spectrum is then propagated to the intermediate plane where all the propagated angular spectra are summed to obtain the pressure on the plane; subsequent plane-to-plane propagation can be achieved using the traditional angular spectrum method. Since the Ring-Bessel calculations are carried out in the frequency domain, it reduces calculation times by a factor of approximately 24 compared to the Rayleigh-Sommerfeld method and about 82 compared to the Field II technique, while maintaining accuracies of better than 96% as judged by those methods for cases of both solid and phased-array transducers.