乳液聚合
乳状液
材料科学
甲基丙烯酸甲酯
聚合
复合数
高分子化学
相(物质)
化学工程
复合材料
化学
聚合物
有机化学
工程类
作者
Jianzhong Zhang,Xiangmei Wang,Hao Xu
标识
DOI:10.1080/10601325.2011.552359
摘要
Abstract The pseudo phase diagrams of the systems of (OP-10/SDS)/butanediol-hydrogen-contained polymethylsiloxane (H-PDMS)/methyl methacrylate (MMA)/n-butyl acrylate (n-BA)–water, with different amounts of H-PDMS, were drawn. PDMS/P (MMA-BA) nano-composite latex particles were prepared by micro-emulsion polymerization, and the initiator was dripped into the micro-emulsion. The experiment results showed that when the amount of H-PDMS was in the range of 2.5∼3.5%, the area of O/W of micro-emulsion in pseudo phase diagram was relatively large, while when the amount of H-PDMS was less than or greater than 2.5∼3.5 %, the area of O/W of micro-emulsion was relatively small. In the micro-emulsion polymerization process, the average size of latex particles was dominated by the amount of initiator and the polymerization temperature. The experiment results also indicated that the size of the PDMS/P (MMA-BA) nano-composite latex particles is in the range of 26–65 nm, with the concentration of the initiator in the range of 0.6 × 10–2-1.46×10−2mol/L, at temperature 60–65°C. Keywords: Phase diagrammicro-emulsion polymerizationhydrogen-containing polydimethylsiloxaneacrylatenano-composite latex particles
科研通智能强力驱动
Strongly Powered by AbleSci AI