材料科学
聚二甲基硅氧烷
复合材料
碳纳米管
复合数
导电体
拉伤
压阻效应
医学
内科学
作者
Yanjun Zheng,Yilong Li,Kun Dai,Yan Wang,Guoqiang Zheng,Chuntai Liu,Changyu Shen
标识
DOI:10.1016/j.compscitech.2018.01.019
摘要
Stretchable strain sensors have promising potentials in wearable electronics for human motion detection, health monitoring and so on. A reliable strain sensor with high flexibility and good stability should be designed to detect human joints motions with a large deformation. Here, a simple and facile solution mixing-casting method was adopted to fabricate a highly stretchable strain sensor based on composites mixing polydimethylsiloxane (PDMS) with hybrid carbon nanotubes (CNTs) and carbon black (CB) conductive nanofillers (CNTs-CB). Bridged and overlapped hybrid CNTs-CB nanofillers structure was achieved in the composite on the basis of the morphology observation. In monotonic stretching test, the CNTs-CB/PDMS composites strain sensors exhibited high stretchability, strain-dependent sensitivity in a wide strain sensing range (ca. 300% strain) and an excellent linear current-voltage behavior. During stretching-releasing cycles, the strain sensors presented excellent repeatability, good stability and superior durability (2500 cycles at 200% strain). Combined with the above outstanding strain sensing performances, the fabricated stretchable strain sensors were attached onto different joints of human body to monitor the corresponding human motions, demonstrating their attractive perspective in large human motions detection.
科研通智能强力驱动
Strongly Powered by AbleSci AI