微观结构
材料科学
材料的强化机理
合金
冶金
沉积(地质)
铝
粒度
位错
复合材料
降水
相(物质)
沉淀硬化
同质性(统计学)
晶界
搅拌摩擦加工
机械强度
极限抗拉强度
热的
搅拌摩擦焊
晶粒生长
工作(物理)
铝合金
压痕硬度
作者
Hongshou Huang,Rui Wang,Jinbiao Qian,Xing Chen,Jiuyang Bai,Xinliang Xie,Guojian Cao,Jian Wang,Hossein Beladi,Peter D. Hodgson,Qi Chao,Guohua Fan
标识
DOI:10.1016/j.matdes.2026.117377
摘要
A multiple-layer AA6060 deposit was manufactured by additive friction stir deposition (AFSD) and the correlation between inhomogeneous microstructure and mechanical performance was quantitatively established across the as-built deposit. The findings revealed that the middle/bottom layers of the build exhibited 40 % lower hardness/tensile yield strength (∼39.2 HV/52.5 MPa) compared to the top layers (∼66.7 HV/87.6 MPa), albeit with slight increase in tensile elongation. The spatially dependent mechanical properties were primarily governed by precipitate evolution: the top layers contain a high number of β′/β -Mg 2 Si strengthening nano-precipitates (∼96 nm), whereas the middle and bottom layers consist of predominantly coarse Si-rich particles (∼316 nm). Quantitative analysis indicates that the evolution of nano-precipitates results in nearly 25 MPa reduction of yield strength in the bottom layers. The evolution of strengthening nano-precipitates is primarily attributed to heat accumulation during AFSD and decrease of thermal residence time with deposition height, which is analogous to a short-time, multi-step artificial aging treatment, promoting in-situ precipitation, growth and transition of nano-precipitates, particularly in the middle and bottom layers. This work will provide insights into the formation mechanism of inhomogeneous microstructure (e.g. precipitate characteristics) and mechanical properties of AFSD-Al alloys, aiding engineering control of microstructural and mechanical inhomogeneities in AFSD-fabricated components.
科研通智能强力驱动
Strongly Powered by AbleSci AI