Influence of Asphaltene Concentration on the Interfacial Properties of Two Typical Demulsifiers

Oil-in-water emulsion is an innovate manner by which heavy crude oil can be transported from producing sites to transforming sites through pipelines. The effect of emulsifier on the interfacial properties and demulsification performance of demulsifier for heavy crude oil–in-water emulsion has been studied by many researchers. However, the influence of asphaltene in heavy crude oil on the interfacial properties of demulsifier has not been investigated yet. In this article, the influence of asphaltene concentration of two typical demulsifiers (straight-chained SP-1 and branch-chained AE-1) was systematically studied in terms of absorption thermodynamics, absorption kinetics, and coalescence kinetics. The results revealed that the demulsifier adsorption was a ΔS controlled spontaneous process. The absolute value of ΔG of SP-1 adsorption was found to decrease with asphaltene concentration, whilst the asphaltene concentration had no significant influence on that of AE-1. With the increase of asphaltene concentration, the demulsifiers’ adsorption rates increased, but the reorganization rates on the interface decreased. Coalescence speed of asphaltene droplet decreased with asphaltene concentration in spite of demulsifier type. Additionally, AE-1 had higher absolute value of ΔG, adsorption speed, and coalescence speed than that of SP-1 at the same condition.