材料科学
选择性激光熔化
腐蚀
功率密度
可制造性设计
点蚀
冶金
激光器
相对密度
激光功率缩放
复合材料
功率(物理)
机械工程
微观结构
光学
物理
工程类
量子力学
作者
Priya Sahadevan,Chithirai Pon Selvan,Manjunath Patel Gowdru Chandrashekarappa,Amiya Bhaumik
标识
DOI:10.24425/afe.2023.146685
摘要
The 17-4 PH Stainless Steel material is known for its higher strength and, therefore, extensively used to build structures for aerospace, automotive, biomedical, and energy applications.The parts must operate satisfactorily in different environmental conditions to widen the diverse application.The selective laser melting (SLM) technique build parts cost-effectively, ensuring near-net shape manufacturability.Laser power, scan speed, and hatch distance operating at different conditions were used to develop parts and optimize for higher density in printed parts.Laser power, scan speed, and hatch distance resulted in the percent contribution towards density equal to 73.74%, 24.48%, and 1.78%.The optimized conditions resulted in higher density and relative density equal to 7.76 g/cm 3 and 99.48%.Printed parts' corrosion rate and wear loss showed more stability in NaCl corrosive medium even at 75 o C than 1M of HCL corrosive medium.Less pitting corrosion was observed on the samples treated in NaCl solution at 25 o C and 75 o C at 72 Hrs than in HCL solution.Therefore, 17-4 PH SS parts are best suited even in marine applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI