Multi-Response Optimization of Milling Process of Hardened S50C Steel Using SVM-GA Based Method

This study aims to find the optimized parameters for surveying the milling process of S50C steel in a minimum quantity lubrication (MQL) environment using a support vector machine-genetic algorithm (SVM-GA). Based on the experimental matrix designed by the Taguchi method, surface roughness and cutting force data were collected corresponding to each experiment with changes in input parameters such as cutting speed, tooth feed rate, and axial depth of cut, along with changes in two parameters of the minimum lubrication system: flow rates and injection pressure. Through analysis by the SVR-NSGAII method, the study obtained the optimal parameters of cutting and lubricating conditions when prioritizing either surface roughness or focusing on the cutting force; however, the most comprehensive result is believed to be achieved by balancing these two factors. So, when striving for the neutral value of both output parameters, which are surface roughness (µm) and cutting force (N), the optimum parameters including injection pressure (MPa), flow rates (mL/h), cutting speed (m/min), feed rate (mm/tooth), and axial depth of cut (mm) are proposed.