Abridged solid-phase extraction with alkaline Poly(ethylene) glycol lysis (ASAP) for direct DNA amplification

Complexity of sample preparation decelerate the development of sample-in-answer-out devices for point-of-need nucleic acid amplification testing. Here, we present the consolidation of alkaline poly(ethylene) glycol-based lysis and solid-phase extraction for rapid and simple sample preparation compatible with direct on-bead amplification. Simultaneous cell lysis and binding of DNA were achieved using an optimised reagent comprising 15% PEG8000, 0.5 M NaCl, and 3.5 mM KOH. This was combined with direct, on-bead amplification using 1.5 μg beads per 20 μL PCR reaction mix. The novel single reagent, 5-min method improved the detection limit by 10 and 100-fold compared with commercial DNA extraction kits and the original alkaline PEG lysis method, respectively. The sensitivity can be further enhanced by one amplification cycle with an ethanol wash or by extending the incubation to 10 min before collecting the magnetic particles. Both methods successfully detected a single copy of Escherichia coli DNA. In biological fluids (saliva, sweat, and urine), the 5-min method was delayed by about one cycle compared to the 15-min method. The proposed methods are attractive for incorporation in the workflow for point-of-need testing of biological samples by providing a practical and chemical method for simple alternative DNA sample preparation.