硫化
差示扫描量热法
等温过程
乙丙橡胶
焓
材料科学
自催化
活化能
阿累尼乌斯方程
乙烯
过氧化物
高分子化学
放热反应
化学工程
共聚物
化学
天然橡胶
复合材料
聚合物
热力学
有机化学
催化作用
工程类
物理
作者
Panayiotis Ketikis,Ioannis Ketikis,P. A. Tarantili
标识
DOI:10.1080/10601325.2023.2265974
摘要
AbstractIn this work, the effect of using of dicumyl-peroxide (DCP) (2, 5 & 8 phr) and co-agent triallyl-cyanurate (TAC) (2, 4 & 6 phr) as cross-linking system as well as multi-walled carbon nanotubes (MWCNTs) (5, 8 και 10 phr) as a filler, for ethylene-propylene-diene terpolymer (EPDM) was investigated. Differential scanning calorimetry (DSC) was employed in order to study the progress of the cross-linking reaction, based on the exothermic vulcanization peaks of isothermal (at 160, 170, 180, 190 °C) and non-isothermal experiments (with heating rates 5, 10, 25, 50 °C min−1). The autocatalytic model was successfully applied to the results of isothermal experiments and the activation energy (Ea) of the reaction was calculated, based on the Arrhenius equation. The Ozawa-Kissinger equations were also applied to the data obtained from the non-isothermal study. From the results obtained from isothermal DSC experiments, an increase was observed in the reaction rates accompanied with a decrease in Ea with the increase of DCP content, whereas a proportional relationship between TAC content and the enthalpy and Ea of the reaction was recorded. The incorporation of MWCNT’s in EPDM increased its Ea. From the non-isothermal DSC experiments, a significant increase in the enthalpy and Ea of the cross-linking reaction was observed at higher DCP content, whereas TAC content did not show any notable effect on the reaction. Based on the results of this research, it is concluded that the increase of peroxide content facilitates the vulcanization of EPDM, whereas inhibition was observed by the incorporation of MWCNT’s.Keywords: EPDM elastomerperoxideco-agentcarbon nanotubesvulcanizationdifferential scanning calorimetry AcknowledgmentsSpecial thanks go to Dr. Dimitrios Korres for his assistance in DSC experiments.Disclosure statementNo potential conflict of interest was reported by the authors.
科研通智能强力驱动
Strongly Powered by AbleSci AI