Tests were conducted to evaluate the applicability of cross-flow filtration for the removal of solids from solvent refined coal (SRC) filter feed. Preliminary tests were also conducted to evaluate cross-flow filtration for the removal of residual solids from solvent de-ashing overflow. A test system was designed and assembled for evaluating cross-flow filtration elements (sintered stainless steel tubes) at velocities of 10-24 ft/sec, filtration pressures of 5-60 psi, and temperatures of 400-500/sup 0/F. The performance characteristics of the elements were determined by measuring the solids separation efficiency and the filtrate flux as a function of time and operating conditions. Tests with the SRC filter feed (5W percent ash) indicated that cross-flow filters can provide excellent solids removal (less than 0.05W percent ash in the filtrate), but the flux levels for all of the elements evaluated were too low ((0.28 gfh (2.6 lb/h.ft/sup 2/)) and declined too rapidly to make cross-flow filtration an economically viable process. Various techniques were evaluated for restoring the flux but were only partially effective. The preliminary tests with solvent de-ashing over-flow (0.25W percent ash) demonstrated that cross-flow filtration can produce a high quality filtrate (less than 0.05W percent ash) at flux levels substantially greater than those measured for the SRC filter feed.