生物炭
超级电容器
热解
材料科学
聚偏氟乙烯
炭黑
化学工程
比表面积
电化学
电容
电极
碳纤维
润湿
复合材料
化学
复合数
有机化学
聚合物
物理化学
催化作用
天然橡胶
工程类
作者
Layal Abdallah,Chantal Gondran,Virginie Monnier,Christian Vollaire,Naoufel Haddour
出处
期刊:Bioengineering
[Multidisciplinary Digital Publishing Institute]
日期:2025-08-04
卷期号:12 (8): 841-841
被引量:6
标识
DOI:10.3390/bioengineering12080841
摘要
This study examines the effect of temperature during pyrolysis on the capacity of cedar wood-derived biochar to be employed as a sustainable electrode material for supercapacitors. Cedar wood-derived biochars were produced at different temperatures of 800 °C, 900 °C, 1000 °C and 1100 °C and fully characterized in terms of their structural, physicochemical and electrochemical properties, including specific surface area, hydrophobicity, electrical conductivity, and surface functional groups. The results indicated that the cedar wood biochar obtained through pyrolysis at 900 °C (BC900) provided optimal electrical conductivity, hydrophobicity, and porosity characteristics relative to the other cedar wood biochars produced by pyrolysis at 800 °C to 1100 °C. Specifically, when compared to commercial activated carbon (AC), BC900 provided half the specific capacitance at a current density of 1 A g−1 and indicated that there is more potential for improvement with further activation and doping. The influence of the binder (either polyvinylidene fluoride (PVDF) or chitosan) in combination with conductive carbon black (CB) was also examined. Electrodes fabricated with PVDF binder showed higher specific capacitance, while biochar electrodes made from CB and chitosan (BC900/CB/chitosan) showed better electrical conductivity, wettability, and good electrochemical stability with >95% capacity retention even after 10,000 cycles.
科研通智能强力驱动
Strongly Powered by AbleSci AI