材料科学
消散
韧性
弹性体
复合材料
软机器人
断裂韧性
可伸缩电子设备
断裂力学
增韧
聚合物
执行机构
数码产品
物理化学
工程类
化学
物理
电气工程
热力学
作者
Navid Kazem,Michael D. Bartlett,Carmel Majidi
标识
DOI:10.1002/adma.201706594
摘要
Abstract Soft and tough materials are critical for engineering applications in medical devices, stretchable and wearable electronics, and soft robotics. Toughness in synthetic materials is mostly accomplished by increasing energy dissipation near the crack tip with various energy dissipation techniques. However, bio‐materials exhibit extreme toughness by combining multi‐scale energy dissipation with the ability to deflect and blunt an advancing crack tip. Here, we demonstrate a synthetic materials architecture that also exhibits multi‐modal toughening, whereby embedding a suspension of micron sized and highly deformable liquid metal (LM) droplets inside a soft elastomer, the fracture energy dramatically increases by up to 50x (from 250 ± 50 J m ‐2 to 11,900 ± 2600 J m ‐2 ) over an unfilled polymer. For some LM‐embedded elastomer (LMEE) compositions, the toughness is measured to be 33,500 ± 4300 J m ‐2 , which far exceeds the highest value previously reported for a soft elastic material. This extreme toughening is achieved by (i) increasing energy dissipation, (ii) adaptive crack movement, and (iii) effective elimination of the crack tip. Such properties arise from the deformability of the LM inclusions during loading, providing a new mechanism to not only prevent crack initiation, but also resist the propagation of existing tears for ultra tough, soft materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI