流离失所(心理学)
气隙(管道)
材料科学
微电子机械系统
变形(气象学)
声学
结构工程
工作(物理)
机械工程
加速度计
作者
Zhijie Jiang,Yun Cao,Xi Aoyu Kong,Haikang Xu,Yafeng Liu,Guangyu Wang,Weirong Nie,Zhanwen Xi
出处
期刊:
日期:2026-08-01
卷期号:: 1045-1049
标识
DOI:10.1109/metms70800.2026.11706346
摘要
To address the circuit complexity and susceptibility to environmental interference associated with conventional microelectromechanical system (MEMS) displacement sensing techniques, a method for sensing the displacement of silicon-based MEMS structures using micro air gap heat transfer was proposed. The suspended microbeam was driven by a constant current, and micro air gap variations changed its thermal conductance and resistance, enabling displacement-to-voltage conversion. Lumpedparameter analysis was performed for the movable heat sinkmicro air gap-suspended microbeam system, and a finite element model incorporating electrical-thermal-fluid-structural multiphysics coupling was established. Steady-state and transient simulations were conducted. The results show that a stable mapping relationship exists between voltage variation and micro air gap thickness under different microbeam currents. At a suspended microbeam current of $\mathbf{0. 1 9 ~ A}$, reducing the gap from 80 to $4 \mu \mathrm{~m}$ produced a 589 mV voltage drop, equivalent to 19.6% of the reference voltage. Based on the response characteristics, the voltage variation exhibited an approximately linear sensing range within $32-52 \mu \mathrm{~m}$, while a weak-response region appeared at larger gaps and a high-sensitivity nonlinear region appeared below $\mathbf{3 2} \boldsymbol{\mu} \mathbf{m}$. An increase in the resistance of the suspended microbeam can significantly enhance its sensitivity. The overall response time was 550 ms. This method can directly generate a relatively large DC voltage output, providing a new approach for simplifying MEMS displacement readout circuitry and achieving the integration of sensing and actuation.
科研通智能强力驱动
Strongly Powered by AbleSci AI