薄脆饼
材料科学
太阳能电池
钝化
光电子学
堆栈(抽象数据类型)
硅
制作
开路电压
晶体硅
二极管
氧化物
图层(电子)
电压
电气工程
纳米技术
冶金
工程类
病理
计算机科学
程序设计语言
替代医学
医学
作者
Byungsul Min,Nadine Wehmeier,Till Brendemühl,Agnes Merkle,Felix Haase,Yevgeniya Larionova,Lasse David,Henning Schulte‐Huxel,Robby Peibst,Rolf Brendel
出处
期刊:Solar RRL
[Wiley]
日期:2020-09-19
卷期号:4 (12)
被引量:18
标识
DOI:10.1002/solr.202000435
摘要
The fabrication of a silicon solar cell on 6 in. pseudo‐square p‐type Czochralski grown silicon wafers featuring poly‐Si‐based passivating contacts for electrons at the cell rear side and screen‐printed aluminum fingers at the front side is demonstrated. The undiffused front surface is passivated with an Al2O3/SiNx stack, and the rear surface is covered with a thin oxide/n+‐poly‐Si/Al2O3/SiNx layer system, contacted by screen‐printed silver fingers. A loss analysis shows that the recombination losses at the metal contacts on both cell sides dominate the total energy losses. A voltage of 700 mV as the highest open‐circuit voltage from a batch of seven cells is achieved, and the best cell efficiency is 22.3%, independently confirmed.
科研通智能强力驱动
Strongly Powered by AbleSci AI