INFLUENCE OF BACKGROUND ELECTROLYTE AND SURFACE-ACTIVE SUBSTANCES ON EFFICIENCY OF ELECTRO-FLOTATION EXTRACTION OF HARDLY SOLUBLE EUROPIUM COMPOUNDS

Europium and its compounds are widely used in high-tech processes of nuclear and hydrogen energy, electronics, medicine and other fields. In this work, the regularities of electroflotation extraction of hardly soluble europium compounds from model systems were obtained and analyzed. The aim of the work is to obtain data on the process of electroflotation extraction of hardly soluble europium (III) compounds from model systems with background electrolyte and the addition of surface-active substances, establishing optimal conditions for efficient extraction of hardly soluble europium (III) compounds. The research was conducted at room temperature (20 ± 2 °C) in a non- current electric flotator of periodic action, which is made in the form of a vertical column. The cross-sectional area of the electric flotator is 10 cm2, the volume of the treated solution is 500 ml, the height of the apparatus is 800 mm, and the sampling valve is located at a height of 40 mm from the electrode unit. The electrode unit consists of an insoluble anode made of ORTA (titanium with ruthenium oxide coating) and of a cathode made of stainless steel mesh (cell size 0.5 × 0.4 mm, wire thickness 0.3 mm). The mass concentration of europium (III) was determined by a mass-spectrometer with inductively coupled plasma of Termo Scientific brand. Determination of particle size and particle size distribution, surface charge of particles of the dispersed phase (ξ) were carried out using a Photocor Compact-Z laser particle analyzer. The efficiency of the process of extracting hardly soluble compounds of Eu3+ was evaluated by the degree of extraction α (%). The objects of study are colloid-dispersed systems of poorly soluble compounds of europium (III) in aqueous solutions in the presence of surface-active substances of various nature and background electrolytes. The initial aqueous solution contains: СEu3+ - 0.1 g/l, Cbackground electrolyte - 1 g/l, background salts: NaCl, NaNO3, Na2SO4; Csas - 5 mg/l. It has been shown that for each type of solution the efficiency of the electroflotation process is achieved at certain pH. It is established that the optimal conditions for the extraction of europium (III) compounds are: volume current density, Jv = 0.4 A/l; process duration 10 min. For nitrate background the degree of extraction is maximum at pH 10 - 11 and at the presence of an anionic surfactant additive in the solution (Оxy surfactant A1218). When extracting europium (III) compounds from a system with a sulphate background the best results were obtained at pH values of 8 and 10, as well as the addition of an anionic and, or cationic (Septa surfactant XEV70) surfactant. Chloride background showed the best conditions for the extraction of europium (III) at pH 7 with the addition of a non-ionic surfactant of PEO-1500 brand. The degree of extraction of europium is 98-99%.