膜
分离器(采油)
静电纺丝
聚丙烯腈
材料科学
化学工程
热稳定性
电解质
热重分析
扫描电子显微镜
电化学
离子电导率
聚合物
纳米纤维
高分子化学
复合材料
化学
电极
生物化学
物理
物理化学
工程类
热力学
作者
Waqas Ul Arifeen,Minchoel Kim,Ting Dong,Rendi Kurniawan,Jungwook Choi,Kisoo Yoo,Tae Jo Ko
标识
DOI:10.1016/j.matchemphys.2020.122780
摘要
A heat resistant, anti-thermal-shrinkage, hybrid, electrospun nano-fibrous polymer membrane separator was synthesized. Three polyacrylonitrile (PAN)-based hybrid membranes were prepared by electrospinning different concentrations of pyromellitic dianhydride (PMDA) and 4,4′-oxydianiline (ODA) followed by oven drying to remove the residual solvent and thermal pressing to achieve the optimal strength and porosity in the membranes. The electrospun hybrid membranes were assessed as separators in lithium-ion batteries (LIBs) in a coin cell. Compared to the commercially available Celgard and PAN separator, the Hybrid3 membrane showed the highest porosity (73.36%), excellent electrolyte uptake (558.63%), and extraordinary ionic conductivity (2.39 mScm−1). Scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis were applied to examine the electrospun nano-fibrous separator membranes. The Hybrid3 membrane separator exhibited good dimensional stability when exposed to a temperature of 250 °C for 1 h. Electrochemical measurements were applied to investigate the electrochemical performance of the commercial Celgard and hybrid electrospun nano-fibrous membranes. The Hybrid3 membrane exhibited better electrochemical stability towards the electrolyte than the commercial Celgard separator and other hybrid electrospun nano-fibrous membrane. The coin cell constructed by the Hybrid3 membrane separator exhibited high specific capacity (184 mAh.g−1) at 1C. Moreover, at 0.5C, the coin cell assembled using the Hybrid3 membrane showed good cyclability and capacity retention (95.57%), as well as better efficiency (99.8%). The Hybrid3 membrane is a capable separator to boost the cyclability and provide thermally safe LIBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI