冶金
珠光体
石墨
材料科学
可加工性
奥氏体
马氏体
机械加工
贝氏体
渗碳体
微观结构
退火(玻璃)
铁氧体(磁铁)
复合材料
作者
Aqil Inam,Kejian He,David Edmonds
标识
DOI:10.1002/9781119223399.ch101
摘要
Designing a competitivefree-machining steel composition enabling less expensive steelmaking, manufacturing and recycling has long been a desirable objective. Foremost amongst a new approach has been simply to promote graphite formation to act as an internal lubricant, thus reducing or eliminating the need for special alloying additions(e.g. Pb, S, P, Bi, Se, Te) which can make the steels difficult to process or re-cycle, and, as more stringent health and safety legislation is introduced might eventually lead to restrictions or total prohibition from certain manufactured products. However, the sluggish kinetics of graphite formation in steel does not lend itself to the normal requirement of rapid manufacturing in thehigh tonnage steel industry. In consequence, this paper reports the machining characteristics of experimental carbon steel with a composition which accelerates graphite formation during a high temperature anneal. Three starting microstructures prior to annealing have been considered; martensite, bainite and ferrite/pearlite. These influence the eventual graphite dispersion and hence the machinability characteristics. The machining characteristics have been measured and also compared with commercial free-cutting steel grades.
科研通智能强力驱动
Strongly Powered by AbleSci AI