材料科学
动态再结晶
微观结构
等温过程
复合材料
应变率
热机械加工
变形(气象学)
再结晶(地质)
变形机理
热加工
压缩(物理)
流动应力
本构方程
钛
相(物质)
同质性(统计学)
钛合金
亚稳态
冶金
动态范围压缩
渗透(战争)
可塑性
延展性(地球科学)
作者
Nan Zong,Yongqiang Ye,Shaopeng Li,Yimin Zhuo,Hao Wang,Xue Zhang,Jianwen Le,Guangfa Huang,Jianwei Mao,Yuanfei Han,Weijie Lü
出处
期刊:Materials
[Multidisciplinary Digital Publishing Institute]
日期:2026-08-03
卷期号:19 (15): 3276-3276
摘要
Thermomechanical processing (TMP) is of critical importance for tailoring microstructures and properties of high-strength titanium alloys and their composites. In this study, mechanical response and microstructural evolution mechanisms of 2 vol.% TiB/Ti-5Al-5Mo-5V-3Cr-1Zr (Ti-55531) matrix composites during isothermal compression at varied deformation temperatures (785–925 °C) and strain rates (0.001–1 s−1) are comprehensively investigated by kinetic calculation and microstructural characterization. Strain-compensated constitutive equations in α + β and β phase regions were established. Results show that deformation temperature and strain rate influence flow behavior and microstructure through dynamic recovery (DRV) and dynamic recrystallization (DRX) of the β phase as well as dynamic spheroidization of the α phase. Crucially, three DRX mechanisms of β phase were identified, wherein TiB-induced β-DRX dominates, with α-assisted β-DRX and continuous dynamic recrystallization (CDRX) as secondary mechanisms. Dynamic spheroidization mechanisms of the α phase, including β-wedge penetration as well as α interaction and kinking, were elucidated. A comprehensive microstructural evolution mechanism map was constructed, and an optimized hot-processing window was proposed. Notably, the introduction of TiB significantly promotes β-DRX, which tends to randomize crystallographic orientations of the β phase, and enhances microstructural stability. This study provides theoretical complement and practical guidance for hot processing and microstructure control of metastable β titanium matrix composites.
科研通智能强力驱动
Strongly Powered by AbleSci AI