强度因子
喷嘴
机械
结构工程
有限元法
材料科学
圆柱
压力容器
应力集中
压力(语言学)
内压
断裂力学
裂缝闭合
工程类
复合材料
机械工程
物理
哲学
语言学
作者
Murat Bozkurt,David Nash,Asraf Uzzaman
出处
期刊:ASME 2010 Pressure Vessels and Piping Conference: Volume 6, Parts A and B
日期:2021-07-13
被引量:3
标识
DOI:10.1115/pvp2021-64385
摘要
Abstract Pressure vessels can be subjected to various external local forces and moments acting in combination with main internal pressure. As a result of the stress system set up, and in the presence of attachment welds, surface cracks can occur on the interior and exterior walls. If these cracks cannot be detected at an early stage, there is a real potential for the vessel to rupture with obvious dangerous consequences. The behavior of fractured or geometric discontinuity structures can be investigated with linear elastic fracture mechanics (LEFM) parameters. The stress intensity factor (SIF) is the leading one, and with correct calculations, it can produce the stress intensity in the crack tip region. In cylinder-cylinder intersections subject to local loads, the maximum stress distribution occurs in and around these opening areas and failure in the system usually occurs in this region. Using this approach, the present study develops three-dimensional mixed mode stress intensity factor solutions on for external cracks on nozzle joints in cylindrical pressure vessels nozzle junctions for a variety of geometrical configurations. This was undertaken using a finite element approach and employing a bespoke software tool and solver, FCPAS - Fracture and Crack Propagation Analysis System — to create the finite element mesh and propagation characteristics. From this, a parameter study examining the influence of the crack shape, size and position was carried out with a fixed pressure vessel nozzle cylinder intersection geometry configuration and the appropriate stress intensity factors identified and reported. The FCPAS tool is shown to be an effective approach to modelling and characterizing cracks in pressure vessel nozzles.
科研通智能强力驱动
Strongly Powered by AbleSci AI