材料科学
共晶体系
冶金
摩擦学
腐蚀
降水
磨料
晶界
合金
Laves相
微观结构
粒度
氧化物
润滑性
相(物质)
蠕动
铸造
压痕硬度
材料的强化机理
涂层
复合材料
金属间化合物
作者
Yinghui Dong,Zhaobing Cai,Bingxu Wang,Zheng Lu,Guangpei Lin,Le Gu
标识
DOI:10.1002/adem.202502512
摘要
This study fabricates AlCoCrFeNb 0.4 Ni 2.1 high‐entropy alloy (HEA) via vacuum induction melting and systematically investigates how heat treatment duration (0–18 h at 800 °C) regulates its microstructure, tribological performance, and corrosion resistance. The as‐cast HEA features a face‐centered cubic + body‐centered cubic (FCC + BCC) eutectic structure and (Co–Cr–Fe) 2 Nb‐type Laves phase, with FCC precipitates already existing in the BCC phase. Heat treatment triggers dual precipitation behavior: FCC phases further precipitate in BCC matrices, and Laves phases form in FCC phases, with both precipitate fraction and size increasing with prolonged holding time. This microstructural evolution expands grain boundary spacing, reducing hardness and wear resistance, yet the wear mechanism (synergistic oxidation, adhesion, and abrasive wear) remains unchanged. Strikingly, heat treatment enhances corrosion resistance by promoting passive film formation/repassivation via Nb‐rich Laves phases, with the 18 h‐treated HEA achieving optimal corrosion performance. Notably, the 2 h‐treated HEA retains favorable hardness and wear resistance while lowering the friction coefficient, providing a novel strategy for tailoring HEAs with balanced mechanical and tribological properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI