3d打印
熔融沉积模型
3D打印
弯曲
材料科学
极限抗拉强度
正交异性材料
复合材料
抗弯强度
织物结构
机械工程
工程制图
结构工程
有限元法
工程类
制造工程
作者
Sabit Adanur,Ajay Jayswal
标识
DOI:10.1108/rpj-05-2020-0095
摘要
The purpose of this research is to design 3D print and analyze mechanical as well as microstructural behavior of interlaced fibrous structures using Dremel 3D45 additive manufacturing (AM) machine.,A series of plain and twill weave fabrics are designed using computer-aided design software Solidworks and printed using fused deposition modeling machines to determine the best model that could be printable. The structures were designed in such a way that the fabricated yarns with pure (PLA) were not sticking to each other in the fabric structure. The specimens were printed in vertical orientation and then tensile and three-point bending (flexural) tests were conducted for twill weave fabrics.,The tests showed that the mechanical strength was higher in the warp direction than in the weft direction. This difference was because of printing of continuous filament-like yarns in the warp direction and staple-like yarns in the weft direction. This orthotropic property of the material was verified by analyzing its microscopic structures via optical microscope.,Future work should include improvement of the structure and exploration of different polymers and their composites to increase the tensile, bending and other strengths to make the 3D-printed structures more flexible and stronger. Future research should also focus on the large-scale manufacturing of 3D printed fabrics.,This paper supports work on wearable 3D-printed fabrics. The 3D-printed fabric will also contribute to new applications and products such as liquid filters.,The research done in this work is new and original. This paper contributes to new knowledge by providing a better understanding of polymers and their 3D printing capabilities to form a complex fabric structure.
科研通智能强力驱动
Strongly Powered by AbleSci AI