核沸腾
材料科学
热流密度
传热系数
临界热流密度
沸腾
微通道
传热
热力学
过热
散热片
计算机冷却
复合材料
机械
强化传热
热阻
热撒布器
质量通量
微型多孔材料
热管
主动冷却
过冷
气泡
汽化
硅
毛细管作用
微型热交换器
水冷
蒸发
压力降
作者
Heungdong Kwon,Daeyoung Kong,James W. Palko,Ercan M. Dede,Mehdi Asheghi,Kenneth E. Goodson
出处
期刊:I-THERM
[Institute of Electrical and Electronics Engineers]
日期:2025-05-27
卷期号:: 1-10
标识
DOI:10.1109/itherm55376.2025.11235584
摘要
Capillary-driven boiling using the microporous structures exhibits an exceptional two-phase heat transfer performance due to the presence of numerous nucleation sites and effective liquid-vapor separation. In addition, the high capillary pressure due to the small pore size enables passive liquid supply. Therefore, capillary-driven boiling is a promising candidate for energy-efficient microcoolers in high-heat-flux electronics. However, achieving area scalability is challenging due to significant viscous pressure losses along the wick, which hinder liquid transport across the boiling region. This limitation poses a major obstacle to contemporary large-area, high-performance chip cooling solutions and requires the development of the area-scalable capillary-driven two-phase cooler. In the present study, we have significantly improved the performance and expanded the cooling area of a capillary-driven micro-cooler with the augmented microporous layers over “sparse” and “dense” micro pin arrays to improve the two-phase heat transfer coefficient in conjunction with a capillary-based silicon open microchannel manifold (channel spacing of $\mathbf{5 7 0, 1 1 4 0}$ and $\mathbf{1 7 1 0 ~} \boldsymbol{\mu} \mathbf{m}$), for efficient liquid delivery and vapor extraction, targeting exit vapor quality, $x_{\mathrm{e}} \approx 1$. Infrared thermography is employed to characterize the spatial temperature distribution and to understand the underlying heat and mass transfer mechanism. To extract the contribution of the two-phase heat transfer from the applied heat flux, the flow rate at the drainages in the test vehicle is measured to estimate the boiling rate at the critical heat flux level. We demonstrated critical heat flux level $\approx 200 \mathrm{Wcm}^{-2}$ and a superheat of $\approx 4^{\circ} \mathrm{C}$, achieving heat transfer coefficient $\approx 430 \mathrm{kWm}^{-20} \mathrm{C}^{-1}$ and $x_{\mathrm{e}} \approx 1$ with minimum inlet flow rates of $5 \mathrm{~g}^{(\mathrm{min})^{-1}}$. Even a higher CHF level of $\approx 450 \mathrm{Wcm}^{-2}$ with superheat $\approx 7^{\circ} \mathrm{C}$, is achieved using inlet flow rate of $15 \mathbf{g}(\mathbf{m i n})^{-1}$ but with $x_{e} \approx 0.65$. The 3D manifold with microchannels spacing of $1140 \mu \mathrm{~m}$ provided the right balance of efficient liquid delivery for capillary wicking and open pathways for vapor extraction, showing the highest critical heat flux, given the same supplied flow rate. The two-phase cooler assisted by capillary-driven boiling in the previous studies typically supplied liquid across the perimeter of the wick, limiting their scalability and performance. The integration of a silicon microchannel manifold with a copper inverse opal porous layer overcomes these limitations by enhancing liquid flow distribution and preventing local dryout, enabling efficient two-phase heat transfer over larger areas. Therefore, the two-phase cooling scheme in this study demonstrates large-area capillary-driven boiling without compromising high heat transfer efficiency, making it a promising solution for contemporary high-performance chip cooling.
科研通智能强力驱动
Strongly Powered by AbleSci AI