New technique for improving transient stability of standalone microgrid using superconductor fault current limiter

This study proposes a new insertion topology for Superconductor Fault Current Limiter (SFCL) to maintain and enhance the transient stability of a wind generation system in a standalone microgrid. The proposed topology is inserting the SFCL in series with the faulty phase only. The new insertion topology performance is compared with the traditional insertion method. The proposed insertion topology of the SFCL displays excellent performance compared to the traditional method. The overall performance of the Micro-Grid is improved. The performance of the wind generator is improved dramatically after employing the proposed controller. The proposed insertion topology suppresses the fluctuations of the wind generator speed (from ± 6% to less than ± 1%) as well as the post fault wind generator real power and imaginary power. For a single line to ground fault, the wind generator active power fluctuates between + 80 kW, and − 40 kW with traditional SFCL insertion topology. When using the proposed insertion topology, the wind generator active power fluctuates between + 27 kW, and + 12 kW. Also, the proposed SFCL insertion topology mitigates the fluctuations in voltage, real power and imaginary power not only at the generator bus but also at all other Micro-Grid buses (PV bus, and storage batteries bus). The voltage at all buses recover to steady state values fast (0.01 s) compared with the recovering time when using the traditional method (nearly 1 s). The proposed method is very simple and low cost because there is no additional hardware is required. This fact makes the proposed method highly attractive from the economical and implementation point of views.