Design and Performance Evaluation of a Fully Integrated Knitted Knee Brace for Knee Motion Sensing

The use of e-textiles in wearable sensor design has recently received much interest in many applications, such as robotics, rehabilitation, personal wellness, and sports. Particularly in the rehabilitation domain, it has provided a potential alternative tool for telerehabilitation. In this paper, we designed and evaluated a knitted knee brace with interconnects, resistors, and sensors for real-time kinematic data acquisition. The real-time data acquisition is transmitted using a printed circuit board (PCB) connected to the knee brace through snap pins. The knitted knee brace was tested on three male and one female participant , aged between 30 and 50 years old. All participants were instructed to perform a walking activity at 1.5 km/h for a duration of 10 seconds on the Advanced Mechanical Technology, Inc (AMTI) treadmill over two sessions. The results demonstrated that the fully integrated knitted wearable knee brace could monitor and track human joint locomotion in real time with a standard deviation of 0.39V and 0.41V , respectively, for these two sessions. However, double peak signals were noticeable from the knitted knee brace at a mean of 80.54% during the gait cycles across the four subjects; this observation could be due to the coupled motion along the transverse and coronal planes during the activity.