Detached-eddy simulation of the vortex system on the high-lift common research model

A complex vortex system exists on the high-lift transport aircraft with components of the nacelle, pylon, high-lift devices, strakes, and brackets, and the investigation of the vortex system is helpful in profoundly understanding the aerodynamic characteristics of actual high-lift aircraft. To investigate the vortex system on the high-lift transport aircraft and evaluate the simulation capacity of detached-eddy simulation (DES) for the vortex system on the high-lift aircraft configuration, a high-resolution DES numerical investigation is carried out on a standard high-lift transport aircraft configuration, the National Aeronautics and Space Administration (NASA) high-lift common research model (CRM-HL). Reynolds-averaged Navier–Stokes simulation (RANS) is also performed to investigate the differences between DES and RANS in predicting time-averaged aerodynamic data on the CRM-HL. After experimental validation of time-averaged surface load and flow patterns, three vortex identification methods are adopted to extract the vortex structures of the flow field. It is found that the Rortex-based vortex identification method can more distinctly extract the fine vortex structures. The DES method can reliably predict the time-averaged surface load while capturing the complex vortex system on the CRM-HL under the concerned case of this work with high resolution.