曲线坐标
有限元法
自由度(物理和化学)
结构工程
曲率
屈曲
离散化
参数统计
多边形网格
压力(语言学)
正交异性材料
拉格朗日乘数
运动学
水准点(测量)
桁架
工程类
工作(物理)
航空航天
组分(热力学)
计算机科学
数学
应用数学
代表(政治)
几何学
要素(刑法)
拉格朗日插值法
接头(建筑物)
结构力学
参数化模型
管道(软件)
作者
Riccardo Augello,Erasmo Carrera
标识
DOI:10.1115/ssdm2026-183296
摘要
Abstract Curved, stiffened panels are primary load-carrying components in aerospace and marine structures, where accurate prediction of displacements, three-dimensional stress concentrations at skin-stiffener junctions, and buckling response often demands costly 3D solid models or ad-hoc 2D+1D couplings. This work proposes a unified two-dimensional finite-element strategy for curved panels reinforced by both straight and curvilinear stiffeners, developed within the Carrera Unified Formulation (CUF). In the proposed approach, the skin and each stiffener are discretized with the same 2D element. The stiffener height is embedded in the element thickness direction and enriched through selectable higher-order Lagrange polynomial expansions, which enhance local kinematics and enforce skin-stiffener continuity directly at Lagrange points, without auxiliary constraints, tie interfaces, or mixed-dimensional coupling. Element matrices are derived from CUF fundamental nuclei independent of the chosen thickness order, enabling systematic refinement for local 3D stress evaluation at bends, corners, and junctions while preserving a consistent element architecture. The formulation naturally accommodates curvature in both the panel midsurface and stiffener layout, allowing mixed reinforcement patterns within a single framework. Benchmark studies show that the proposed 2D-only model reproduces 3D reference and high-fidelity literature results for deflections, critical axial/shear stress components, and nondimensional buckling parameters, capturing stiffener-dominated modes with substantially fewer degrees of freedom than 3D meshes and offering an efficient tool for design loops and parametric analyses.
科研通智能强力驱动
Strongly Powered by AbleSci AI