胶粘剂
材料科学
复合材料
聚乙烯醇
湿强度
环氧树脂
粘附
粘接
甲醛
聚醋酸乙烯酯
粘结强度
粘结强度
填料(材料)
基质(水族馆)
沸腾
共价键
涂层
环氧胶粘剂
抗剪强度(土壤)
沸点
基础(拓扑)
作者
Yating Shao,Yaokun Zhang,Tongda Liu,Yanqun Huang,Junwei Li,Xin Ran,Guanben Du,Long Yang
标识
DOI:10.1016/j.colsurfa.2026.139905
摘要
To address the inadequate intrinsic strength and weak interfacial bonding of biomass-based adhesives while overcoming the environmental and health concerns associated with formaldehyde emissions from traditional petroleum-based wood adhesives, this study developed a high-performance adhesive system through crosslinking network design and interface engineering. Amino-functionalized polyvinyl alcohol (A-PVA) was prepared by modifying polyvinyl alcohol (PVA) with 3-aminopropyltriethoxysilane (APTES). A-PVA was then crosslinked with diacetyl cellulose (DAC) via the Schiff base reaction to produce a cellulose-based liquid adhesive (A-PVA-DAC). Meanwhile, an adhesive film was obtained using the flow-coating method, which was also suitable for wood bonding. The wood surface with epoxy groups was treated by γ-glycidoxypropyltrimethoxysilane (KH-560), and interacted with the adhesive with amino groups under hot-pressing to enhance the interfacial adhesion via covalent bonds. The liquid adhesive prepared with an A-PVA to DAC mass ratio of 1:1 exhibited optimal performance. Under hot-pressing conditions at 140 °C, plywood specimens using epoxy-functionalized wood surfaces (EWS) as the substrate achieved a specimen retention rate of 91.67% after boiling water treatment, with a bond strength of 1.18 MPa, which is 197% that of plywood prepared using natural wood surface (NWS). The plywood manufactured using adhesive films exhibited dry strength, cold water strength, and hot water strength of 1.58 MPa, 1.10 MPa, and 0.92 MPa, respectively. Although the bonding strength of plywood using adhesive films was lower than that of plywood using liquid adhesives, adhesive films offer greater convenience in storage and transportation. This work provides novel insights into enhancing the performance of biomass adhesives and developing novel resin adhesive films through the design of crosslinked networks and interfacial engineering regulation.
科研通智能强力驱动
Strongly Powered by AbleSci AI