控制理论(社会学)
滑模控制
稳健性(进化)
自抗扰控制
平坦度(宇宙学)
Lyapunov稳定性
鲁棒控制
控制工程
工程类
国家观察员
计算机科学
控制系统
非线性系统
控制(管理)
人工智能
宇宙学
物理
基因
电气工程
生物化学
量子力学
化学
作者
Amine Abadi,Amani Ayeb∗,Moussa Labbadi,David Fofi B,Toufik Bakir,Hassen Mekki
出处
期刊:Sensors
[Multidisciplinary Digital Publishing Institute]
日期:2024-04-29
卷期号:24 (9): 2849-2849
被引量:28
摘要
This paper proposes a robust tracking control method for wheeled mobile robot (WMR) against uncertainties, including wind disturbances and slipping. Through the application of the differential flatness methodology, the under-actuated WMR model is transformed into a linear canonical form, simplifying the design of a stabilizing feedback controller. To handle uncertainties from wheel slip and wind disturbances, the proposed feedback controller uses sliding mode control (SMC). However, increased uncertainties lead to chattering in the SMC approach due to higher control inputs. To mitigate this, a boundary layer around the switching surface is introduced, implementing a continuous control law to reduce chattering. Although increasing the boundary layer thickness reduces chattering, it may compromise the robustness achieved by SMC. To address this challenge, an active disturbance rejection control (ADRC) is integrated with boundary layer sliding mode control. ADRC estimates lumped uncertainties via an extended state observer and eliminates them within the feedback loop. This combined feedback control method aims to achieve practical control and robust tracking performance. Stability properties of the closed-loop system are established using the Lyapunov theory. Finally, simulations and experimental results are conducted to compare and evaluate the efficiency of the proposed robust tracking controller against other existing control methods.
科研通智能强力驱动
Strongly Powered by AbleSci AI