Influence of two kinds of clearance joints on the dynamics of planar mechanical system based on a modified contact force model

This study takes the slider-crank mechanism with revolute joint and translational joint as the research object and studies the contact force model of the clearance joint and the influence of the hybrid clearance joints on the nonlinear dynamic behavior of the mechanism. A modified contact force model is established based on the simplified elastic oscillator model, which can be used as a normal force in clearance joint. In the new contact force model, the component n of the indentation depth can be arbitrarily selected and it can support the calculation of contact force for both fully elastic recovery, non-elastic recovery and fully inelastic recovery. Based on the LuGre friction model, the tangential friction model of the clearance joint is given. Thus, the normal force and tangential force during the dynamic contact of the clearance joint are formed. Combining Lagrange's equations of the first kind with the modified normal force and tangential friction force, the dynamic equations of the multi-body system with clearance joints are established. The Baumgarte stabilization method is used to improve the numerical stability. The correctness of the dynamic prediction model in the mechanism with clearance joint is verified by experiment. The dynamic analysis of the slider-crank mechanism with mixed clearance joints shows that the revolute clearance joint has a greater influence on the mechanism than the translational clearance, and the revolute clearance joint plays a leading role in the dynamic response.