Surface and micromechanical analysis of polyurethane plates with hydroxyapatite for bone structure

Abstract To analyze the surface topography and mechanical properties of a polyurethane derived from castor oil reinforced with hydroxyapatite (PU–HA) for bone fixation. The surface analysis was performed by Scanning Electron Microscopy (SEM) and the mechanical properties by Vickers microhardness and tensile tests. The SEM images showed that the PU surface presented important characteristics for materials intended for bone fixation, such as an irregular and porous surface. The analysis showed a surface with alternating areas with depressions and elevations of approximately 80±100 µm, presence of pores of 12 µm in size. The microhardness analysis showed values of 0.42±1.01 HV for PU–HA plates, lower in relation to the poly lactic-co-glycolic acid (PLGA) plate (control group). The elastic modulus and ultimate tensile strength of 317.4 MPa, and 35.57 MPa for PLGA sample, 1.187 MPa, and 0.29 MPa for PU–HA sample. The PU produced showed good surface properties, however demands better mechanical properties.