陀螺仪
谐振器
电极
模式(计算机接口)
材料科学
相(物质)
声学
光学
电子工程
物理
光电子学
控制理论(社会学)
计算机科学
工程类
量子力学
操作系统
控制(管理)
人工智能
作者
Libin Zeng,Jingyu Li,Yao Pan,Pan Xiao,Xingyuan Tang,Yongqiang Xu,Hui Luo
标识
DOI:10.1109/tim.2025.3566834
摘要
The damping asymmetry, the phase delay and the electrode errors are crucial factors that limit the performance of hemispherical resonator gyroscopes. This paper employs mode reversal to compensate for damping asymmetry. A mathematical model is first established incorporating the stiffness asymmetry, the damping asymmetry, the phase delay and the electrode errors. The influences of the phase delay and the electrode errors on mode-reversal force-to-rebalance hemispherical resonator gyroscopes are analyzed, respectively. New methods to identify the phase delay and the electrode errors are proposed, which eliminate the influences of both the control-loop couplings and the couplings among different error sources. Experimental results demonstrate that the angle-dependent bias in the turntable-rotation mode is reduced from 3.72 °/s to 0.02 °/s after the compensation of detection electrode errors, demonstrating a decrease of 99.5%; the angle-dependent bias in the virtual-rotation mode is reduced from 0.107 °/s to 0.006 °/s after the compensation of actuation electrode errors, demonstrating a decrease of 94.4%. After compensation, the bias instability of the mode-reversal force-to-rebalance hemispherical resonator gyroscope is improved from 0.046 °/h to 0.003 °/h, demonstrating an improvement of 93.5%. The proposed methods can be widely applied to Coriolis vibratory gyroscopes with symmetric structures operating in both the force-to-rebalance mode and the whole-angle mode.
科研通智能强力驱动
Strongly Powered by AbleSci AI