电阻式触摸屏
串扰
CMOS芯片
补偿(心理学)
电气工程
光电子学
触觉传感器
电子工程
材料科学
物理
计算机科学
工程类
人工智能
精神分析
心理学
机器人
作者
Yao Li,Junfeng Geng,Mao Ye,Jiaji He,Xiaoxiao Zheng,Qiuwei Wang,Yiqiang Zhao
标识
DOI:10.1109/tvlsi.2024.3447164
摘要
This article presents a novel readout circuit for the resistive tactile sensor array. Based on the 2-D scanning mechanism, a crosstalk suppression technique is proposed by combining the correlated double sampling (CDS) and zero potential method (ZPM). The output of the same sensor under different bias conditions is captured twice and amplified by a channel-parallel fully differential gain stage, performing analogous subtraction. To achieve nonuniformity compensation, the current injected into the readout channel is adjusted by the channel-parallel digital-to-analog converter (DAC). A successive approximation register (SAR) analog-to-digital converter (ADC) performs quantization, and the chip can be used as a serial peripheral interface (SPI) slave to update register values for gain configuration, power consumption control, and nonuniformity compensation. The 180-nm CMOS prototype chip occupies an area of$4.8~\text {mm}^{2}$and consumes$285~\mu $W. In order to validate the design, a tactile sensing system is built, using the readout circuit along with a$10\times 10$flexible sensor array. With the techniques proposed in this article, the readout error of the sensors in array is less than 0.3‰.
科研通智能强力驱动
Strongly Powered by AbleSci AI